Get Support
123-456-789-10
The advantage of solid CBN inserts is related to cutting parameters
-
By: admin
- Oct 24, 2023
- 143 Visit
The advantage of Solid CBN inserts from Mintek Abrasive & Tools (www.mintektools.com) could be performed fully based on the reasonable cutting parameters.
The cutting parameters introduction is as follows:
(Which need to be adjusted based on the actual machining conditions and workpiece type)...
| Materials | Vc（m/min） | Fr（mm/r） | Ap（mm） |
| Gray cast iron | 500~1500 | 0.5~0.8 | 0.25~1.0 |
| Chilled cast iron | 50~120 | 0.1~0.6 | 0.1~1.2 |
| Hardened steel （45~65HRC） |
60~150 | 0.2~0.3 | 0.6~2.5 |
| Surface hardened alloy （>35HRC） |
80~240 | 0.12~0.25 | 0.5~2.5 |
| Tungsten Carbide （Co%>17%） |
20~40 | 0.1~0.25 | 0.1~0.5 |
| High Mn-steel | 140~200 | 0.3~0.7 | 0.2~2.9 |
| Inquiry for solid CBN inserts, Please email to mintek999@sina.com | |||
We want to give you 10% discount for your first order,
Use discount code at checkout
We want to give you 10% discount for your first order,
Use discount code at checkout