Get Support
123-456-789-10
The Grdae Introduction of Solid CBN inserts
-
By: admin
- Oct 24, 2023
- 101 Visit
| Grdae Introduction of Solid CBN inserts | ||||||
| Profiles: | The CBN inserts of Mintek abrasives & Tools was produced by taking cubic boron nitride as main ingredient, add special ceramic components as binder, under the condition of the ultra high temperature and high pressure sintering. Compared with the CBN cutting tool materials from domestic and abroad, Mintek CBN inserts have higher hardness and excellent heat resistance. Due to these features, Mintek CBN can be used in high speed and efficient machining of hardened steel and high hardness of cast iron and other hard processing material. Through technical innovation and more than 10 years experience in research and development of practice, we can help customer to customized solve processing problems, make the CBN cutting tool exert its many excellent performance of high efficient rough and finish machining, long-life, anti-breakage and wear-resistance. | |||||
| Grade | Futures | Main application | Structure | HV | Cutting Material | Industry |
| MTN-60 | ● Show its excellent performance when roughing and big depth cutting. ●Updated material with wear-resistance and anti-breakage. ● 100% CBN solid sintering，All corner can be cutting edges, and entire length of edge can be used, with performance and economy futures. |
High speed roughing of cast iron, The material of hard to cut | Solid CBN | 4000-4200 | Gray Cast Iron /High chrome /High Mn-steel /High Ni-Cr | Metallurgical Roll, Surfacing roll repair, Mine machinery, Big gear, etc. |
| MTN-90 | ●Common CBN material for all machining of Hardened steel. ● Updated material with wear-resistance and anti-breakage. ● From continuous cutting to light -middle-interrupted cutting，the stability and sharp are improved, the surface roughness are also very stable. |
Hardened steel continuous/Interrupted Cutting | Solid CBN/Brazing CBN tips | 3900-4100 | Hardened steel | Wind power Bearing, Crankshaft, Mine machinery，Automobile Gear,etc. |
| MTN-91 | ●Excellent wear-resistance and heat-resistance ●High speed continuous turing and milling. ●Be applied in semi-finishing and finishing of hardened steel parts, eg. Bearing steel, Mould steel, Gauge steel,Tool steel,HSS. etc material. |
Hardened steel continuous Cutting | Solid CBN/Brazing CBN tips | 3300-3500 | Hardened steel | Gear, Bearing, etc. |
| MTN-70 | ● Best suitable for high speed finish machining of cast iron. ●Realizing the high efficiency processing of sintered alloy. ●Corresponding to various difficult processing materials, taking into account cast iron and hardened steel, better on heat-resistance. |
Cast iron/Hardened steel semi-finishing/fine finishing | Solid CBN/Brazing CBN tips | 3700-3900 | Cast Iron/ Hardened steel |
Auto brake disc, Cylinder blocks of car engines, Cylinder liner, Gear, Bearing. |
| MTN-80 | ●Best apply to high speed fine finishing cutting of Cast Iron, meet more than V=500m/min high speed cutting，show its excellent surface roughness and long tool life. ● Make high efficiency machining of the sintered alloy come ture. ●All kinds of material of hard cutting, conclude Cast Iron and hardened steel. |
Cast Iron fine finishing | Solid CBN/Brazing CBN tips | 3700-4000 | Cast Iron | Auto brake disc, Cylinder blocks of car engines, Cylinder liner, Gear, Bearing. |
| Email: mintek999@sina.com | ||||||
We want to give you 10% discount for your first order,
Use discount code at checkout
We want to give you 10% discount for your first order,
Use discount code at checkout